Forums / パーツショプMAXプロダクトフォーラム Parts Shop MAX Products Forum / Fender Roller is completely retooled for the 2014 model.

Parts Shop MAX :: Forums :: MAXに質問　Ask MAX :: パーツショプMAXプロダクトフォーラム Parts Shop MAX Products Forum
Fender Roller is completely retooled for the 2014 model.	<< Previous thread \| Next thread >>


Moderators: Parts Shop Max, Dan at MAX USA

Author

Post

Dan at MAX USA

Sat Dec 21 2013, 12:22am

Registered Member #2

Joined: Sun Jan 21 2007, 08:28pm

Posts: 2866

Its here, Its beautiful in the new black chrome color. Its got all the things you loved about our previous generation lowered car fender rollers plus a couple clever new things & made better than ever.

The Japanese refer to the perfect tire to fender clearance as "Tsuda-Ichi" (paper thin). The way to achieve the perfect Tsuda-Ichi style is to bend the inner lip on the quarter panels and fenders flat against the outside skin. The most unique and vital feature of the MAX FENDER ROLLER is that it is the only fender roller in the world that is convertable for use on extremely low cars. Most fender rollers are only designed for use on factory height vehicles forcing coilover equipped vehicles to raise up to stock height to roll the fenders creating extra work. The roller angle is especially suited to bending the lip as flat as possible against the surface to give your car the ultimate flushness. The urethane rollerbearing wheel is strong enough to bend metal yet soft enough to prevent paint damage on most cars when used in conjunction with a heat gun. The roller is a must for fitting low offset wheels. For cars utilizing standard offset wheels, use MAX Tsuda-Ichi wheel spacers and the MAX fender lip roller to create that hella-flush JDM look on your car. Its the best wheel fitment tool money can buy.

Shes a black Chrome Beauty with an improved precision and chrome plating in the main screw drive system.

The angle of the roller head allows you to make a very flat lip.

Larger Diameter fiber reinforced ball grips make it easier to apply pulling pressure.

Double welded base plate, top & bottom side shown here.

This chamfer in the bottom lugnut hole lets you have the option of putting the nut directly on the fender roller in the case of cars with really short studs. Be sure to always use all 4 or 5 taper washer adapters to evenly distribute the rolling force. Failure to do so will make the roller base warp. Be sure to communicate this point on rental rollers.

Highest quality hardware and laser cut steel used throughout this roller highlights the great quality of this 2014 MAX fender roller.

[ Edited Sat Dec 21 2013, 12:42am ]


Jump: Back to top