Parts Shop MAX :: Forums :: MAXに質問 Ask MAX :: パーツショプMAXプロダクトフォーラム Parts Shop MAX Products Forum
350z Coilovers, Complete multilink, and Super Steering Angle! << Previous thread | Next thread >>
Go to page   <<        >>  
Moderators: Parts Shop Max, Dan at MAX USA
Author Post
Kevin
Mon Jan 10 2011, 01:20PM
Registered Member #216
Joined: Fri Jan 18 2008, 06:31PM

Posts: 42
Do you have an approx price & eta for the steering angle kit ???
Thanks

Kevin
Back to top
Dan at MAX USA
Mon Jan 10 2011, 09:43PM

Registered Member #2
Joined: Sun Jan 21 2007, 08:28PM

Posts: 2866
no way to tell when all we have finished is the hand made version.
I imagine it will be less than KPR since its not 100%CNC aluminum - we use a lower cost tubular steel construction.

[ Edited Tue Jan 11 2011, 12:35AM ]
Back to top
Kevin
Tue Jan 11 2011, 12:31AM
Registered Member #216
Joined: Fri Jan 18 2008, 06:31PM

Posts: 42
Are you planning to made a Front Upper Control Arm??

Thanks

Kevin
Back to top
Dan at MAX USA
Tue Jan 11 2011, 12:42AM

Registered Member #2
Joined: Sun Jan 21 2007, 08:28PM

Posts: 2866
Maybe we will later after these parts are completed, but we can achieve any desireable camber with the lower control arm so it seems like its not really needed unless you want to control the front track width...

I guess for grip drivers or street guys the upper A-arm is easier than converting the whole front end with our parts but if you have our front end its not needed for alignment.
Back to top
Kevin
Wed Jan 12 2011, 01:38AM
Registered Member #216
Joined: Fri Jan 18 2008, 06:31PM

Posts: 42
Also, if we broke a parts, does the part will be available alone in that case?? Like if I bend a flca, can I will bought one flca alone ?

thanks

Kevin
Back to top
Dan at MAX USA
Wed Jan 12 2011, 07:02PM

Registered Member #2
Joined: Sun Jan 21 2007, 08:28PM

Posts: 2866
we will supply replacement parts individually
Back to top
Kevin
Wed Jan 12 2011, 07:12PM
Registered Member #216
Joined: Fri Jan 18 2008, 06:31PM

Posts: 42
Ok thanks.

I send you an email Dan.

Kevin
Back to top
Royal_T
Tue Jan 25 2011, 01:37AM
Registered Member #951
Joined: Sun Jan 23 2011, 08:21AM

Posts: 63
I am so in for this.. Please let us know when this is available..

Great work on the design, can't wait to see them in action..
Back to top
Hollywood
Wed Jan 26 2011, 04:37AM
Registered Member #708
Joined: Sun Feb 28 2010, 07:22PM

Posts: 653
dan did you get a chance to take photos of the rear and how your going to mount the coilover set up and what not before Kado took the car ? just wondering
Back to top
Dan at MAX USA
Thu Jan 27 2011, 07:07AM

Registered Member #2
Joined: Sun Jan 21 2007, 08:28PM

Posts: 2866
We developed the rear on a different car (pic on Page 1)
Back to top
Go to page   <<        >>   

Jump:     Back to top

Syndicate this thread: rss 0.92 Syndicate this thread: rss 2.0 Syndicate this thread: RDF
Powered by e107 Forum System