Parts Shop MAX :: Forums :: MAXに質問 Ask MAX :: 作ってもらいたいパーツ Wish List
rx8 suspension parts << Previous thread | Next thread >>
Go to page       >>  
Moderators: Parts Shop Max, Dan at MAX USA
Author Post
angelo se3p
Sat Mar 26 2011, 03:36PM
Registered Member #993
Joined: Sat Mar 05 2011, 09:14PM

Posts: 18
pbm coilovers (can slam the car), front and rear adjustable camber arms, toe control arms, maybe knuckles
and can you weld a Torsen Differential?
Back to top
Hollywood
Sat Mar 26 2011, 04:01PM
Registered Member #708
Joined: Sun Feb 28 2010, 07:22PM

Posts: 653
haha after sing the car thread i thought this would come up lol... dose anyone already make arms for the FE ?
Back to top
o.g.darkdrifter
Sat Mar 26 2011, 06:42PM
Registered Member #580
Joined: Mon Jul 13 2009, 06:02PM

Posts: 155
I've seen JIC makes arms for them but they are crazy expensive. I think there are a couple of companies here in the U.S. that make them but I think the prices are about the same.
Back to top
angelo se3p
Sun Mar 27 2011, 05:13AM
Registered Member #993
Joined: Sat Mar 05 2011, 09:14PM

Posts: 18
yeah, jic, megan racing, and a few other companys make stuff.. but jic's prices are a little high for me, kinda wanted to see if pbm could do anything
Back to top
Hollywood
Sun Mar 27 2011, 06:28AM
Registered Member #708
Joined: Sun Feb 28 2010, 07:22PM

Posts: 653
well wait till monday and see what dan has to say about it,
Back to top
angelo se3p
Sun Mar 27 2011, 05:21PM
Registered Member #993
Joined: Sat Mar 05 2011, 09:14PM

Posts: 18
sounds good
Back to top
Dan at MAX USA
Mon Mar 28 2011, 04:34AM

Registered Member #2
Joined: Sun Jan 21 2007, 08:28PM

Posts: 2866
Its odd in 4 years no one has asked for RX8 stuff.
I think we have a responsibility to support the FC and FD in a more comprehensive manner before we start into the RX8 complete package.
Perhaps we would start with coilovers like the rx7's



[ Edited Mon Mar 28 2011, 04:35AM ]
Back to top
Hollywood
Mon Mar 28 2011, 04:46AM
Registered Member #708
Joined: Sun Feb 28 2010, 07:22PM

Posts: 653
yeah i think the price is starting to come down on alot of the newer cars so people are more seseptable to sliding them. kinda like me looking at the IS and SC and FE there just getting reasonable and parts are redily available. unlike corollas lol
Back to top
angelo se3p
Mon Mar 28 2011, 04:46AM
Registered Member #993
Joined: Sat Mar 05 2011, 09:14PM

Posts: 18
that would be nice to get some coilovers.. i want something that slams the car

or can i get arms and stuff made by u? not necessarily goingon the market
Back to top
Dan at MAX USA
Mon Mar 28 2011, 05:02AM

Registered Member #2
Joined: Sun Jan 21 2007, 08:28PM

Posts: 2866
We can do one off but its expensive. I cant tell you how much till I see the car and understand the issues and solutions.

There is a ghetto way where we cut the arm and add or subtract length or put an adjuster on the end of an exsisting arm, and then there is a complete aftermarket arm fabrication. Sometimes we may take two nissan parts to get the right stuff to make one arm for another car so thats why it could cost ~ triple.

[ Edited Mon Mar 28 2011, 05:05AM ]
Back to top
Go to page       >>   

Jump:     Back to top

Syndicate this thread: rss 0.92 Syndicate this thread: rss 2.0 Syndicate this thread: RDF
Powered by e107 Forum System