Parts Shop MAX : Forum / topic http://www.partsshopmax.com/ en-gb This site is powered by urvak which is released under the terms of the GNU GPL License. maxusa@nospam.com (Parts Shop MAX 河森) maxusa@nospam.com (Parts Shop MAX 河森) Thu, 28 Mar 2024 17:28:41 +0000 Thu, 28 Mar 2024 17:28:41 +0000 http://backend.userland.com/rss e107 (http://e107.org) hourly 1 60 Parts Shop MAX : Forum / topic http://www.partsshopmax.com/e107_images/button.png http://www.partsshopmax.com/ 88 31 HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 We started with his godspeed FMIC kit whick looks good from the outside...



But bad from the inside...


We used what was there and did a little cut and paste


Martins tig weld up close


The difference between ours and theirs from the inside


We cut the end tanks and made a small radius 90 degree bend using several sections of mandrel bent tube




now the IC is way farther back from the front end. When the car came in it was crushed in one corner, and the fmic piping was in pretty bad shapre on one side, but now its hay bail spec


We probably cut out about 40 inches of intercooler pipe which should produce better response and crash protection

as a bonus the cops cant see it from the outside

The transformation cost $450

We would like to build a kit that basically bolts on ready to go out of the box following this concept. Maybe it should go where the radiator is, and the radiator can move back 3" but that will require some relocation brackets. The concern is the headlight interference which we could not really see in frans car since they were missing.]]>
Tue, 17 Feb 2009 19:44:05 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 ]]> Dan at MAX USA Fri, 24 Aug 2012 00:07:10 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 ]]> Hollywood Mon, 13 Aug 2012 23:46:21 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
jholman05 wrote ...
Well I finally got around to making my OEM headlights work with this kit by making a very simple flat plat bracket and extended the OEM turnbuckles 6-3/8".

Below is a video and some pictures showing the install. Only modifications to the chassis would be drilling one hole in each of the core support uprights.

Plate bracket has 4 holes drilled in it, two bolted to the motor, and two bolted to the core support. The turnbuckle I cut and spliced in a rod that was 6-3/8" long x similar diameter. Once that's done, you'll need to take the rotating arm off the motor and clock it so that when the motor is up the headlight is up, since the motors are now positioned at a slightly different angle. That part is much easier than it sounds. This will fit with the OEM pignose bumper without modifications, in order to fit the OEM headlight shrouds I do believe you'll need to make the turnbuckle offset like in the video up there ^. I don't like those things anyways.

Once my bumper gets back from the body shop I will post pictures with it all installed. Until then this is what ya get :ddog:













Passenger side-


Driver side-


I just wish I would have done this a couple years ago. At the time I was in a rush to get the car back together for zdayz 2010. If you want dimensions on the plate, let me know I can pop them off and make CAD drawings out of them. They are mirror images of one another.

From our customer on zilvia http://zilvia.net/f/forced-induction/335933-parts-shop-max-high-mount-intercooler-turbo-inlet-stock-live-quotes-thread-4.html#post4841672]]>
Dan at MAX USA Wed, 08 Aug 2012 18:25:53 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Martin Wed, 18 Feb 2009 20:38:19 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Tue, 17 Feb 2009 19:56:54 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Never Lift Tue, 17 Feb 2009 19:49:13 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
]]>
Dan at MAX USA Tue, 17 Feb 2009 19:59:55 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 danegerous Tue, 17 Feb 2009 20:51:01 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Martin Tue, 17 Feb 2009 21:34:28 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Never Lift Tue, 17 Feb 2009 23:21:21 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 white lao tzu Wed, 18 Feb 2009 07:33:21 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
That's my opinion anyway.]]>
JankiS13 Wed, 25 Feb 2009 02:29:24 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 red_rabbit86 Thu, 26 Feb 2009 14:54:36 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Never Lift Thu, 26 Feb 2009 16:03:50 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 DoriftoArab Fri, 03 Apr 2009 18:23:54 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Rusted_s14 Thu, 02 Apr 2009 03:25:37 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008







]]>
Dan at MAX USA Fri, 03 Apr 2009 02:01:41 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 red_rabbit86 wrote ...

putting your ic infront of the rad doesnt provide less air to your rad? i wouldnt think that it would make your car over heat more?


Nope.

Actually, the typical japanese style front mount set up is less efficient for the radiator- because with the I/C so far away from the rad, it creates a low pressure zone in front of the rad. Especially so in drifting where we're moving at an angle everywhere.

With the i/c up against the rad. air forced thru the I/c runs right thru the rad.

+ the other benefits already mentioned]]>
Sideways_In_SD Fri, 03 Apr 2009 01:20:51 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Rusted_s14 wrote ...

I am in the process of doing this to my Zenki S14, but it looks as if there will be interference with the headlights, how did Matty solve this? Pictures if possible?


You can tilt the rad back a little like scooter did orrr

Trim/bend/alter the sheet metal behind the headlights to allow the pipes to pass by orrrr

do both orrrr

put the rad in the trunk like the Weld S14 ]]>
Sideways_In_SD Fri, 03 Apr 2009 01:23:11 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Rusted_s14 Fri, 03 Apr 2009 04:03:13 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 JankiS13 Thu, 09 Apr 2009 22:09:05 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
The radiator top mounts would be fairly umcomplicated to lengthen but the bottom mounts - those bushings in the cups in the lower radiator support - that will take some extra effort to produce something in kit form.]]>
Dan at MAX USA Fri, 10 Apr 2009 18:16:15 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
I have a car for S14 design already.

Still need a car to mock up S13 - Must have bottom mount turbo. Holler if you want to donate your time to our cause.

We should have kits ready to ship sometime in august.

Special introductary pricing $380 with free shipping to 48 states

Key features of our drift specific High Mount Intercooler Kit:
~Mounts in front of the radiator, under the core support. Inlet and outlet shoot past the sides of the radiator.
~2.5"inlet and 2.75"outlet maintain proper velocity (3" pipes are too big for stock turbos)
~3.25" thick, extra wide core gives proper volume to the short height design
~Specifically designed for the bottom mount t25&t28 nissan turbos
~Extra short pipes for best response
~No BOV flange (we dont run them on our cars...TIG your choice of flange is optional)
~Allows better water cooling because it blocks less air from the radiator
~Mounts as far as possible away from front crash zone...and thieves...and cops
-Black intercooler core is optional
-Reinforced silicone couplers are available in Orange or Black.
S14 kit will have:
8x Stainless T-bolt clamps
2x 2.75" straight couplers
1x 2.5" straight coupler
1x 2"-2.5" step 90* coupler

S13 kit will have:
8x Stainless T-bolt clamps
2x 2.75" straight couplers
1x 2.5" straight coupler
1x 2"-2.5" step 45* coupler












]]>
Dan at MAX USA Fri, 24 Jul 2009 00:34:30 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
AC stuff out of the car saves 30 pounds

the new intercooler weighs around the same as the old fmic but the pipes are less than half the length

test fit

here is the metal that needs cut

cold pipe

hot pipe

Pipes and HMIC mounted






still need to add bungs

also we're going to build an inlet pipe to compliment this kit]]>
Dan at MAX USA Wed, 29 Jul 2009 20:25:58 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 JankiS13 Thu, 30 Jul 2009 06:59:16 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 rbs14 Mon, 28 Sep 2009 05:11:17 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008


Added bung for large cold pipe vaccum line

Changed the inlet and outlet pipe length and angles




still need s13 and s14 local customers for more test fitting]]>
Dan at MAX USA Wed, 12 Aug 2009 19:40:35 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Here are the final pix.







I need to track test this still, im planning on seeing low water temps, and instant boost response, cant wait!]]>
Dan at MAX USA Fri, 14 Aug 2009 19:17:11 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Matt_T Sat, 30 Jan 2010 16:28:07 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 slideways90 Sat, 03 Oct 2009 18:04:05 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008



















]]>
Dan at MAX USA Thu, 01 Oct 2009 01:11:37 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 JankiS13 Fri, 02 Oct 2009 15:32:31 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Fri, 02 Oct 2009 18:40:54 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008

]]>
Dan at MAX USA Fri, 02 Oct 2009 19:27:21 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 1. make a bracket to hold it up in the full upright position
2. take out the OEM light, use Aftermarket slim lights and bracket the cover in the "sleepy eye" position
3. get the japanese fiberglass light bucket and cover from supermade
4. go with the JDM silvia front end]]>
Dan at MAX USA Mon, 05 Oct 2009 19:10:28 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
]]>
Dan at MAX USA Wed, 07 Oct 2009 01:36:47 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 rbs14 Sat, 17 Oct 2009 01:11:32 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
s13 silvia face customer fitment photos




]]>
Dan at MAX USA Thu, 15 Oct 2009 22:04:11 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 o.g.darkdrifter Wed, 14 Oct 2009 20:31:45 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 fastmatt Wed, 14 Oct 2009 20:57:15 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Wed, 14 Oct 2009 23:50:31 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 puhpaper Thu, 15 Oct 2009 18:45:07 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Marcus Fri, 16 Oct 2009 18:15:05 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
here is installed
]]>
rbs14 Mon, 09 Nov 2009 16:02:45 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Mon, 09 Nov 2009 21:21:53 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 rbs14 Tue, 10 Nov 2009 01:28:30 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
you'll have to let me know how it works out after completion/tuning]]>
Dan at MAX USA Tue, 10 Nov 2009 20:39:50 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dirty Monkey Sat, 02 Jan 2010 21:12:56 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Also rbs14 what rad is that?]]>
mattheripper Mon, 04 Jan 2010 04:17:51 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
with the end tanks 838mm wide, and 908mm from one side mounting bracket to the other]]>
Dan at MAX USA Mon, 04 Jan 2010 23:21:14 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Matt_T Fri, 08 Jan 2010 14:49:36 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 rbs14 Thu, 07 Jan 2010 18:29:40 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Fri, 08 Jan 2010 20:43:17 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 ill prob need s13 intercooler w/ s14/s15 piping to mate with ca18det manifold.

i was thinking about the pop up headlight situation...i might use some linear actuators to still open and close headlights...just a thought i was pondering today.]]>
ca18det180sx Thu, 28 Jan 2010 03:47:35 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA wrote ...

if you are local we can mock up the pipes specifically for your car, if not maybe one of the current choices is close enough?

linear actuators would totally work

i wish i was Dan...i live in VA. THE S14/S15 piping is the closest match for CA...im sure ill have to modify cold side some to mate. i really like this HMIC setup, because i just bought a brand new oem 180sx bumper and i did not want to cut it up.]]>
ca18det180sx Thu, 28 Jan 2010 21:58:27 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
linear actuators would totally work]]>
Dan at MAX USA Thu, 28 Jan 2010 20:14:55 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Tue, 02 Feb 2010 20:04:54 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 TongWoo Fri, 26 Feb 2010 15:03:09 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 TongWoo Fri, 26 Feb 2010 13:12:40 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Fri, 26 Feb 2010 19:37:40 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Fri, 26 Feb 2010 20:26:34 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 TongWoo Fri, 26 Feb 2010 20:09:53 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 TongWoo Fri, 26 Feb 2010 20:42:53 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 TongWoo Tue, 02 Mar 2010 16:03:51 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Tue, 02 Mar 2010 06:29:30 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Thanks to our local customer helping with the development!

]]>
Dan at MAX USA Wed, 03 Mar 2010 23:24:02 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 TongWoo wrote ...

Okay, I've just run into so much internet b.s. about the turbine wheel. I place more weight on your opinion. Thanks, man. The pbm intercooler setup just makes so more sense to me than the front mount setups. I don't think I could rock a front mount after seeing the hmic

yeah i figured since the factory setup didnt come with BOV...should be fine. im not going to run my SARD R2D2 when i get this new HMIC setup,]]>
ca18det180sx Fri, 05 Mar 2010 15:46:30 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 ]]> ca18det180sx Thu, 04 Mar 2010 22:22:39 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 nutendo Fri, 05 Mar 2010 08:10:12 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 ca18det180sx wrote ...

anyone volunteer with a ca18det yet?

nope
nutendo wrote ...

How much would it be if I drive to the shop to get it install

its $50/hour so maybe $100-$150]]>
Dan at MAX USA Fri, 05 Mar 2010 17:18:59 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 nutendo Sat, 06 Mar 2010 08:28:25 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 chask Tue, 23 Mar 2010 16:53:10 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
when you drift, you modulate the throttle to balance counter steer. The BOV releases fuel metered air for no good reason while you feather the throttle which is not needed. Furthermore boost leaks are a common problem so more reliability can be had through a simplified system.

If you have an old crusty turbo its going to go out with or without the BOV, and if you have a strong fresh turbo it will last a long time with or without the BOV.]]>
Dan at MAX USA Tue, 23 Mar 2010 22:00:30 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 chask Wed, 24 Mar 2010 01:05:22 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 ka24eracer Wed, 24 Mar 2010 02:56:05 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 ca18det180sx Mon, 29 Mar 2010 18:21:31 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Tue, 30 Mar 2010 02:16:20 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA wrote ...

HMIC is out of stock until the third week of april, as soon as we have it we will send tracking by email.



the price you have to pay for baller parts! ill be patiently awaiting.]]>
ca18det180sx Tue, 30 Mar 2010 03:51:18 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
We have a Greddy Intake Manifold cold pipe solution finalized and it has been added to the shopping cart as an HMIC kit option.






]]>
Martin Thu, 22 Apr 2010 22:43:48 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 ca18det180sx Sat, 24 Apr 2010 21:54:59 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 slideways90 Wed, 16 Jun 2010 01:31:49 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
with the end tanks 838mm wide, and 908mm from one side mounting bracket to the other]]>
Dan at MAX USA Wed, 16 Jun 2010 05:55:34 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 slideways90 Wed, 16 Jun 2010 16:53:21 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
yes sir I will sell the pipe kit for $250]]>
Dan at MAX USA Thu, 17 Jun 2010 01:05:19 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 chask Fri, 25 Jun 2010 21:39:04 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 chask Thu, 24 Jun 2010 14:14:51 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008





do you guys have a flow graph of the intercooler ... at what psi is it max-out]]>
rbs14 Fri, 25 Jun 2010 00:00:34 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 chask wrote ...

When will u have more in stock I haven't got mine yet but my friend kody Wants one for his rb26

middle of next month]]>
Dan at MAX USA Mon, 28 Jun 2010 23:56:45 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 chask Tue, 29 Jun 2010 01:07:03 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
i ordered s13 kit with s14 cold pipe. i took a chance and did some mods too make work.

cut and turned the top rad hose to bend around piping

ordered a longer 45* coupler to mate with TB

cut headlight brackets and welded them to fixed position

sprayed everything with VHT epoxy spray









]]>
ca18det180sx Thu, 29 Jul 2010 00:56:02 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Tue, 07 Sep 2010 23:38:46 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
HMIC's in stock again, this round is coming with polished pipes - Check it out:
S13



S14-S15


]]>
Dan at MAX USA Thu, 05 Aug 2010 18:26:56 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 ]]> ca18det180sx Fri, 06 Aug 2010 22:23:22 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
polished + one piece !

]]>
Dan at MAX USA Mon, 09 Aug 2010 21:08:24 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008

I live in germany and the laws about cars & tuning are f*cking hard.
You can´t modify your car with parts that didn´t got checked by the TÜV/ TUV.
The most parts are illegel here....

So i´m interested in your IC setup, cause i´m swapping to a SR and i want a complete new and better setup.
And the big FMIC is a cop magnet here....
The main problem is, that my popups must be working.
I mean they must be going "in-and-out".

Dan at MAX USA wrote ...

the HMIC kit does not come with any provisions for modding the headlights. Basically it interferes with the motor but not the light. So there is 4 choices that I know of
1. make a bracket to hold it up in the full upright position
Illegal, they must be working.
2. take out the OEM light, use Aftermarket slim lights and bracket the cover in the "sleepy eye" position
Illegal too...
3. get the japanese fiberglass light bucket and cover from supermade
*cough* *cough* you know.....it.
4. go with the JDM silvia front end
The same thing....


Maybe you´ve got another solution for this?
Is it impossible to use the popup motor?

Damn i want this IC setup too.....
]]>
s1984 Tue, 07 Sep 2010 17:49:31 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 -Logan]]> LoFoSho Mon, 01 Nov 2010 14:34:45 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Tue, 02 Nov 2010 18:39:42 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 LoFoSho Wed, 03 Nov 2010 10:50:52 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
I´ve got a tuning front bumper at the moment, but i want to go "back" to my facelift front.
Do you peopl think that the airflow will reach the core?

The IC is blocked at the front from the bumper.
Will get enough air behind it for cooling or is it too restrictive?

Here´s a pic i hope it´s better then m english. ^_^
]]>
s1984 Tue, 09 Nov 2010 20:01:08 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Wed, 10 Nov 2010 18:19:03 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
i have an S13 with S15 core support and i will be ordering one by tomorrow along with cobra flex and other cool stuff. i probably wont order everything tomorrow though. im so excited]]>
killer240 Sun, 14 Nov 2010 19:20:06 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
About people not running bov, I was also kindoff sketchy on that at first and my buddy still doesnt trust it but here's the thing I had a redtop about 5 years ago with a t25 and a HKS SSQV and the turbo lasted 6 months. I'm now running without a bov and everything seems fine so far. I think it's like Dan said, if you have an old crusty turbo it's going to blow regardless of using a blow off valve.

From the responses I've gotten from people I tell that I dont have a BOV, it's more of a " but a BOV sounds bad ass" and that's something completely different that has nothing to do with durability.]]>
rafas13 Sun, 21 Nov 2010 01:32:07 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Mon, 22 Nov 2010 23:00:41 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 killer240 Thu, 25 Nov 2010 03:45:16 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Mon, 29 Nov 2010 18:33:44 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 MattRose Tue, 21 Dec 2010 17:27:44 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
the best plan would be to get a new intake manifold to move the TB to a more conventional placement, custom pipes, and the core we sell separately.

we can do the custom IC pipe job for local customers.

alternatively I suppose the pipes would still be a little shorter than a front mount intercooler if the manifold was left alone but its not as good as it could be.]]>
Dan at MAX USA Wed, 22 Dec 2010 20:04:29 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 so i got it on, everything is hooked up but my S15 lights hits the core, so im going to try and push the core in some more. for some reason it wont go any further. its probably hitting something inside.




IMG_2579 by d_2jzgte, on Flickr

anyways i like it.


edit: i got it done.
nevermind i did get the hardware lol it was still in the box, i cut the box in pieces cuz it was goin to the garbage then the hardware fell off. lol SORRY

shipping was okay i guess, just one of the brackets on the core got bent. overall its ALL GOOD. now whats next on my wish list hmm...


IMG_2588 by d_2jzgte, on Flickr

IMG_2590 by d_2jzgte, on Flickr

IMG_2591 by d_2jzgte, on Flickr]]>
killer240 Thu, 30 Dec 2010 01:20:10 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Hollywood Fri, 06 May 2011 01:33:58 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 solotwo Thu, 05 May 2011 20:27:02 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
nothing I can do when things get pushed back except ask you if you want your money back or if you want to pay for air freight
]]>
Dan at MAX USA Fri, 06 May 2011 03:07:39 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008




I had to trim the lights, flatten the lip on the front crossmember as well as slotting the radiator holes to move it up, as well as mount the clutch from the front of the fan and trim the back of the blades.]]>
Tenchuu Fri, 10 Jun 2011 08:57:02 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Sun, 12 Jun 2011 14:45:23 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Marino. Sun, 26 Jun 2011 19:25:27 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Tue, 28 Jun 2011 18:25:37 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
I have it on my sr right now, fucken love it. Thats why i wanna use it on my next motor]]>
Marino. Thu, 30 Jun 2011 04:29:45 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008

]]>
Dan at MAX USA Tue, 01 May 2012 21:43:48 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
http://zilvia.net/f/forced-induction/335933-parts-shop-max-high-mount-intercooler-turbo-inlet-stock-live-quotes-thread.html



]]>
Dan at MAX USA Wed, 03 Aug 2011 01:31:06 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 ]]> silvialuvr Wed, 17 Aug 2011 23:32:56 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 but
I don't know anyone who runs that stuff]]>
Dan at MAX USA Thu, 18 Aug 2011 05:56:10 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008


@ Marino - Not sure what you mean by properly, Most RB people ditch electric fans since it doesn't cool as well as an un-ducted clutch fan. It's considered an upgrade to run a stock clutch fan. Most people put on an electric and then wonder why it overheats.]]>
Tenchuu Fri, 19 Aug 2011 23:48:24 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Dan at MAX USA Sat, 20 Aug 2011 15:15:33 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 courtesy of Tim in New Zealand

]]>
Dan at MAX USA Mon, 03 Oct 2011 23:27:31 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 conrad Tue, 29 Nov 2011 22:01:35 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Greddy intake manifold type Cold pipe for HMIC

OEM S13 SR and all KA motor intake manifold type Cold pipe for HMIC

OEM S14-15 SR motor intake manifold type Cold pipe for HMIC

T25 Turbo Hot pipe for HMIC

T28 Turbo Hot pipe for HMIC
]]>
Dan at MAX USA Mon, 26 Nov 2012 22:42:33 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008
Re: HMIC High Mount InterCooler with short pipe kit *update p.3* http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008 ]]> Dan at MAX USA Mon, 26 Nov 2012 23:45:16 +0000 http://www.partsshopmax.com/e107_plugins/forum/forum_viewtopic.php?4008