ズーマー カスタム スクーター Ruckus & Custom Scooter Parts


NEW Rear Half Frame






Rear Half Frame USD,
click to see price with shipping
~ Early adopters will get free shipping when the frame is the only item in the cart.
~ Steel tubular construction bolt on rear frame / lowered seat / extended motor mount combo part
~ For Ruckus Gy6 Motor swap and 3+4 offset wheel on MAX hub
~ Compatible with OEM Honda Ruckus seat and front half frame
~ EPD black gloss base coating is compatible with powder coat or paint
~ Optional LED strip tail light mount is +$60
~ LED mounting strip is built for the flexible 9.8 inch strip light sold separately here: http://www.chromeglow.com/catalog.asp?prodid=651396&showprevnext=1
~ On our scooter we use an 11 inch Fastace external reservoir shock model BDA-51AR found on www.ebay.com but there are some custom mounting brackets needed. Others have used the ATR shock on this frame (seen in the video of the black and white AF bike)
~ We used a motor supplied by www.scooterworks.com and a short axle supplied by www.standardfunctions.com, and a custom carb mounting elbow.
*Different suppliers of wheels and the above parts will effect final fitment, and for the best alignment on the large array of brand combos and specs out there, motor mount tabs should be rewelded to put the wheel on center with the frame.











NEW EXHAUST IN STOCK NOW!

Complete exhaust system for Ruckus GET 50cc and GY6 150cc scooters

To order a scooter exhaust system there are 2 steps.

1. Choose your Scooter Exhaust Header - 50cc GET or 150cc GY6

Honda Ruckus stock 50cc GET motor stainless steel segmented bend header pipe USD,
click to see price with shipping
GY6 150cc swap motor stainless steel segmented bend header pipe USD,
click to see price with shipping
2. Choose your Scooter Exhaust Muffler style

Angle Cut Tip - Natural Finish Titanium Muffler USD,
click to see price with shipping
Angle Cut Tip - Burnt Finish Titanium Muffler USD,
click to see price with shipping
Straight Tip - Natural Finish Titanium Muffler USD,
click to see price with shipping
Straight Tip - Burnt Finish Titanium Muffler USD,
click to see price with shipping
Turn Down Tip - Natural Finish Titanium Muffler USD,
click to see price with shipping
Turn Down Tip - Burnt Finish Titanium Muffler USD,
click to see price with shipping
~ Titanium Muffler with choice of tip and tip finish
~ Stainless header
~ Stainless mounting bracket
~ Hardware, slip fitting springs, and muffler strap are included. Gasket is not.
~ Complete exhaust system with brackets and hardware is just 3 pounds 9 oz!
~ Gy6 150CC version coming in 2 months, pre order yours now.

Check out the AMAZING full titanium mufflers! You will be terrorizing your neighbors soon with this.

Three tip shapes and two colors = Six styles to choose from

You can get Burnt or Natural Brushed Titanium finish.
Straight cut tip, Angle cut tip, or Turn Down tip.





The zero oxygen TIG welding quality is insane inside and out!

This is the complete system shown for the 50cc with all stainless steel header, bracket, springs and hardware.

It also comes with the spring tools not shown here.




50cc version shown complete below with Natural Ti Straight cut tip




Gy6 150cc exhaust is in stock!




Gy6 version mounted









50cc version mounted


MAX Aluminum Helical Grips for Ruckus

MAX Helical Scooter Grip Pair BLACK USD,
click to see price with shipping
MAX Helical Scooter Grip Pair BLUE USD,
click to see price with shipping
MAX Helical Scooter Grip Pair COPPER USD,
click to see price with shipping
MAX Helical Scooter Grip Pair GOLD USD,
click to see price with shipping
MAX Helical Scooter Grip Pair PURPLE USD,
click to see price with shipping
MAX Helical Scooter Grip Pair RED USD,
click to see price with shipping
MAX Helical Scooter Grip Pair SILVER USD,
click to see price with shipping
~ Aluminum triple helix tube
~ Choose from 5 Anodized colors, Polished Aluminum or Copper Plated finish
~ Laser logo
~ Rubber Diamond Pattern non-slip grip
~ CNC end caps
~ Diamond pattern non slip rubber grip
~ Sold as a pair of 1" and 7/8" ID for both twist throttle right and bar only left sides
~ Compatible with Ruckus and other twist grip moto applications















MAX Type 2 Grips

MAX Type 2 Scooter Grip Pair BLACK USD,
click to see price with shipping
MAX Type 2 Scooter Grip Pair BLUE USD,
click to see price with shipping
MAX Type 2 Scooter Grip Pair COPPER USD,
click to see price with shipping
MAX Type 2 Scooter Grip Pair GOLD USD,
click to see price with shipping
MAX Type 2 Scooter Grip Pair PURPLE USD,
click to see price with shipping
MAX Type 2 Scooter Grip Pair RED USD,
click to see price with shipping
MAX Type 2 Scooter Grip Pair SILVER USD,
click to see price with shipping







Parts Shop MAX Honda Ruckus 150cc GY6 motor swap harness USD,
click to see price with shipping
*We run most of the tech help for harnesses through a Total Ruckus thread here:
http://totalruckus.com/phpBB3/viewtopic.php?f=47&t=61500
Make sure you read the original post there before purchase and during install because there is a wealth of knowledge there that is impossible to list here in our product page
Despite our efforts in thoroughly labeling the harness, newbs attack the job all the time and people still come up with an odd selection of scooter electrical accessories all the time so give it a read.







MAX GY6 Ruckus Wire Harness Features:

~ Made for GY6 motor with stock or aftermarket controls
~ More complete than any harness on the market because it comes with not only all of the essential connectors but also pre installed fuses, relays, and universal rectifier.
~ Length to accomodate ANY scooter (including our 100% custom stretched tubular frame)
~ Wires are clearly labeled to make install a breeze
~ 5 feet of braided wire loom included, its more flexible and way better looking than that split plastic conduit on the other guys stuff
~ Each harness is manufactured and tested to OEM automotive standards.

NOT "plug and play" (but neither is any "P&P" harness as soon as you change the lights or controls or length)
Every harness our brand or others will need to be cut and tucked differently for each scooters build and accessories for the cleanest possible look. You should cut & solder to eliminate as many plugs as possible to maximize reliability no matter which harness you choose its worth the few minutes difference now so you don't have to troubleshoot later.

Listed below is every connection and the connection type.

Battery box side:
Comes with 5 wire 11 pole rectifier 3 pin and 4 pin plug connection already done for you
11 pole is backwards compatible for all stators.
CDI plugs (buy our rev limit and timing programmable CDI - a MAX exclusive! for $60)
Kill switch solder/crimp
Key switch solder/crimp
"4 into 2" Ignition relay is included and integrated into the harness for you!
Battery ring terminal connections with boots
Fuse Holders equipped with blade and round fuses
starter relay 90* ring terminal with cover
starter relay plug
start button solder/crimp
flasher relay is included and installed on harness for you with spade commector
brake switch solder/crimp
stock left controls solder/crimp
horn spade connector
front lights solder/crimp

Engine side:
6 wire stator solder/crimp ground, , 2 bullet connectors, and 4 pin plug
Autochoke 2 pin plug
tail lights solder/crimp
coil spade connectors with coil boot
starter wire - nut and screw provided for bolt on
motor to frame ground with dual ring terminals

What you need to do the job and get to riding:
Wire stripper/cutter
Electrical tape
Zip ties
Barrel connectors and a crimper (not recommended) OR
Solder, Soldering iron, heat shrink wrap, heat gun (recommended)
GY6 150cc long case motor (from scooterworks etc) that comes with with CDI, Carb, Starter, Starter Relay, Coil, coil wire, sparkplug
If you are missing any of those items, buy from partsforscooters.com
You need fuel delivery by mikuni pump and battery, gas etc. to start it up when finished
Lights & Horn
Stock ruckus key switch
Stock or aftermarket left controls
*Optional - If you want to eliminate the stock right controls - use momentary switches for start & kill fitted into the battery box holes where the indicator lights used to be
*make sure there is a ground connection between your front and rear frames!!

Dual adjustable CDI with 16 way programable RPM + TIMING adjustability for AC current GY6 motors USD,
click to see price with shipping






To dial in electronic advance on the CDI:
If you turn the gold knob right, clockwise 5 turns, 5x360 degrees, the timing advance ramps up from 2350-3250RPM
If you turn the gold knob right, clockwise 10 turns, 10x360 degrees, the timing advance ramps up from 2500-3400RPM
this adjustment changes when the advance hits.
The ignition advance angle ramps up from 0-16 degrees on this CDI

You can set the RPM through the rotary REV selector dial as follows:
0 unlimited RPM
1 7000
2 7500
3 8000
4 8500
5 9000
6 9500
7 10000
8 10500
9 11000
A 11500
B 12000
C 12500
D 13000
E 13500
F 14000

Set the limit to just after the RPM where your power on the Dyno falls.

Drum brake hub to adapt GY6 motor to wheels with 3" backspacing SILVER USD,
click to see price with shipping
Drum brake hub for GY6 BLACK USD,
click to see price with shipping
Dual Pattern, 4 lug 4 inch lug spacing, four 12mm x 1.25 thread studs, for use with golf cart wheels
OR
4x110 ATV pattern available with stainless 10mm1.5thread bolts and aluminum washers & 4x4 studs pressed out for $20 more.

For use with wheels measuring 3 inch back spacing and 4 or 5 inch front spacing 10 or 12 inch dimeter is OK.

Shown below with 4x4 studs left in.



Shown below with 4x4 studs pressed out and mounted to 4x110 wheel with stainless and aluminum hardware.



If you want to knock out the 4x4 studs out yourself without a press, wrap a sledge in lots of tape to protect surface after the stud pops out.



4x110mm hardware: Stainless button head 10mm 1.5thread bolts and aluminum washers to protect your ATV wheel.

2mm stackable positive offset spacer now available for $10ea. USD,
click to see price with shipping


this is what it looks like bolted to a golf cart style wheel.



UPDATE! GY6 Hub now available in black