Air Suspension & Coilovers for IS
MAX Japan Online Store


Bag Over Damper Option

Air Springs & Service to prepare dampers for use with air





Bag Over Damper Air Spring, 14ID top, Bellows Type, 1/4" compression fitting for DOT line.
~ For use with all MAX dampers with m52p1.5 threaded bodies with 65mm x 49.8od unthreaded upper shock bodies.
~ All 2015 and earlier dampers need to be sent in for mandatory servicing to meet the spec above.
~ Dampers already equipped for air will be released mid 2016.
~ For use with m14 top shafts such as all rear dampers and Double wishbone fronts only.
~ Fitment excludes m52x2.0 thread version: s13, s14, SC, FC, r32.
~ 5" Inflated diameter
~ Lifetime manufacturers defect warranty
~ Sold individually.
*Requires management system of your choice with 1/4" lines
*Requires an additional 3/4 inch of wheel spacing/offset clearance versus coil springs.
Double Wishbone Front or Rear Air Spring, Bellows Type
USD,
click to see price with shipping

REAR Air Springs & Service to prepare dampers for use with air




Bag Over Damper Air Spring, 14ID top, Sleeve Type, 1/4" compression fitting for DOT line.
~ For use with all MAX dampers with m52p1.5 threaded bodies with 65mm x 49.8od unthreaded upper shock bodies.
~ All 2015 and earlier dampers need to be sent in for mandatory servicing to meet the spec above.
~ Dampers already equipped for air will be released mid 2016.
~ For use with m14 top shafts found in rear dampers only.
~ Fitment excludes m52x2.0 thread version: s13, s14, SC, FC, r32.
~ 3.75” Inflated diameter.
~ Lifetime manufacturers defect warranty.
~ Sold individually.
*Requires management system of your choice with 1/4" lines
*Requires an additional 1/8 inch of wheel spacing/offset clearance versus coil springs.
Rear Air Spring, Sleeve Type
USD,
click to see price with shipping

MAX COMPETITION COILOVER


With a lifetime of tuning experience and a passion for drifting competition, Kawamori Eisuke, Shizuoka’s premier tuner designed these coil overs for you to enjoy superior competitive performance without depending on traditionally overpriced or not so conveniently serviceable parts offered by corporate performance suppliers.

COMPETITION SUSPENSION coilover key features:
  • Light weight and strength are combined in our many aluminum components

  • Full tap independent adjustments

  • Aggressive damping range with fast adjust

  • Allows you to do 32 clicks of damping change in just 12 clicks!

  • Pillow ball upper mount on front AND REAR!

  • Replaceable shock & customizable spring

  • FAMOUS Super low ride height ability

  • Billet T6061 lightweight aluminum Lower mount with urethane bushing

  • All aluminum components are hard anodized

  • High rigidity/High precision piston rod design exceeds racing standards

  • Full thread tap piston and locking collar allows vehicle height to be adjusted independent of the spring preload

  • 2 collar wrenches are included

  • Light weight T6061 aluminum spring perch and locking collar designed to bear the weight of vehicle

  • Unique use of spring upper perch front and rear provides independance between the spring and the pillowball on all 4 corners

  • Linear spring available to special order in custom Kg (even numbers only)


MAX Competition Coilovers for Lexus IS 300 First generation (XE10) 1998-2005 Altezza 12kg F, 10kg R
USD,
click to see price with shipping