RC350 AVC10 GSC10, 4th Gen GS350 GRL10, 3rd Gen IS350 XE30 Lexus, GRX130 Toyota Mark-X Coilovers and Air Suspension
Debut: Coil-Over-Dampers and Air Suspension
PRE-ORDER NOW FOR STOCK ARRIVING AT THE END OF MARCH


Uncompromising QUALITY, Unmatched ADJUSTABILITY, Factory direct PRICE


Front end set, coilovers and airbags are coming soon! 40mm shortened front knuckle mod service is available now.

Development Video & Proof of Concept Testing:

NEXT LEVEL SUSPENSION:
~ All solid spherical bearing mounts increase suspension accuracy and allow for High KG rate springs.
~ Equipped with 20 KG front and 16 KG + 3 KG helper rear springs. This is intended for extreme fitment applications where you want to ride extremely low without hitting the ground when driving through dips. The helper springs add down travel for traversing driveways without teetering on 3 wheels.
~ 12 click damper settings range from extraordinarily stiff to a compliant but firm ride.
~ Upgrade to an air spring at any time for a $1000 option cost. However if you opt for air springs during your initial purchase, we will install them for free in lieu of supplying the coil springs.
~ Thoughtfully designed rear upper mount has 2 different mounting positions, one farther out from the chassis to achieve the extra clearance required for the (larger diameter than spring) bags while the inboard position is intended to give more clearance for wide wheels whn using coil springs.

***Advisory*** These are required when using our rear arm set because the aftermarket RLCA does not support to Frame OEM type spring. Coilovers and bag-over-dampers are compatible with an otherwise stock suspension (if you don't lower it very much). However if you desire more than a little ride height change, or you want to fit aftermarket wheels, that can only be aligned with our arm set. The spring rates supplied and dampers set to hard rides extraordinarily stiff whereas the air springs provide a ride more similar to the OEM feel. CLICK HERE for install example.


Coilovers w/20KG F. 16KG Rear Springs for RC350 AVC10 GSC10, 4th Gen GS350 GRL10, 3rd Gen IS350 XE30 Lexus, GRX130 Toyota Mark-X
USD, PRE-ORDER NOW FOR STOCK ARRIVING AT THE END OF MARCH

click to see price with shipping


Bag-Over-Damper Air Suspension for RC, IS, GS, MarkX
USD, PRE-ORDER NOW FOR STOCK ARRIVING AT THE END OF MARCH

click to see price with shipping

Coilover set with Coil-Springs removed and the Air Spring over Damper option installed. Requires Air Management system.


Air Spring Option for Coilovers



Bag Over Damper Air Spring, 14ID top, Bellows Type, 1/4" compression fitting for DOT line.
~ For use with Double wishbone front only.
~ 5" Inflated diameter
~ Lifetime manufacturers defect warranty
~ Sold individually.
*Requires management system of your choice with 1/4" lines
*Requires an additional 3/4 inch of wheel spacing/offset clearance versus coil springs.
Double Wishbone Front or Rear Air Spring, Bellows Type
USD,
click to see price with shipping

REAR Air Springs & Service to prepare dampers for use with air


Bag Over Damper Air Spring, 14ID top, Sleeve Type, 1/4" compression fitting for DOT line.
~ For use with rear dampers only.
~ 3.75” Inflated diameter.
~ Lifetime manufacturers defect warranty.
~ Sold individually.
*Requires management system of your choice with 1/4" lines
*Requires an additional 1/8 inch of wheel spacing/offset clearance versus coil springs.
Rear Air Spring, Sleeve Type
USD,
click to see price with shipping