ワンオフパーツの制作 Fabrication at MAX USA


Custom intercooler pipes
With the new bead roller we have here in the shop we're producing some top notch custom intercooler pipe. Let us know about your custom pipe needs - I'm sure we can accomodate anything you need even hard water lines. This example is in steel but with the new Miller TIG welder we can now do aluminum as well! $60/hour plus materials









For customers in Southern California we offer Welded diff and Roll Cages and pipe Fabrication.
For Japanese customers near Fujieda prefecture there is a variety of tuning services available including Dyno ECU remap!

We are now offering a gusset reinforced weld locked zero slip differential service with 100% unbreakable guarantee up to 350PS. (If you have the money for 400 horses you need to go but a 2 way diff)

Here are the options:
$75 on your clean open diff internals
$150 on your drained open diff pumpkin which will include tear down, solvent cleaning, welding and steel, and assembly with loctite, RTV, and proper torque specs.

Return shipping must be paid in addition to our service for out of town customers who send us they're open diff by UPS. At 16 lbs for the internal gears and 75 lbs dry for a pumpkin you should seriously consider the economies of just sending the internal assembly with pumpkin and ring gear removed. There is a lot of info online regarding diff removal and installation so please search.

There is also a lot of online information and opinions on both sides of the fence regarding weather or not you should get a welded diff so educate yourself. Never get a welded diff if you dont know exactly what you are getting into because it can be dangerous to yourself and others on the street if you dont know the characteristics well. You have been warned, if you have the money go buy a 2 way. If you are a responsible individual with a desire to drift despite your lack of funds we would love to assist.

Here are pictures of the open diff assembly taken apart, a photo of the internal assembly you need to bring/send, the gusset, and one of the multiple welding stages. Note the penetration and quality of the welds - This can only be done with proper technique and machinery!





Mild steel Custom roll cages for local customers from $100 per point + 100 per extra bar, $200 for boxed in bases, dimple die gussets extra, DOM tube available for extra $
This pricing is assuming the first five building blocks of the cage are like this:
Step 1: Boxed in bases $200
Step 2: Main hoop $200
Step 3: Wheel well bars $200
Step 4: Harness bar $100
Step 5: Door bars $200
Additional steps / bars are completely optional as to their order and unusual items are priced per materials plus $50/shop hour.


Examples:

Parts Shop MAX pro drift series legal cage featuring:
65 feet of 1.5 x 0.12" DOM Steel Tubing & 40 hours of labor
-8 points
-boxed base plates
-main hoop
-wheel well bars to support main hoop
-main hoop diagonal bar
-driver and pass. side harness bars
-full front cage through dash has only 2 bends per side
-A and B pillar punch and flare gussets
-X door bars
-Rear strut bar
-Xbar from main hoop to rear struts






















Parts Shop MAX Tsuiso Drift class legal / Pro Street Spec cage in 1.5 x .095 mild steel
-8 points
-Main hoop
-Main hoop support bars to wheel wells
-Main hoop diagonal bar
-Drivers only harness har
-Diagonal bar main hoop to rear strut
-Rear strut bar
-Boxed in base mounts
-Punch and Flare gussets on A, B, and C pillars
-Full Front cage bent around the dash, built for maximum head room (4 bends/side)
-low door bars with room to swing your feet
























The White S13 cage was $1750 and The yellow S13 was $2000. Theres no set design or price though, its completely custom so you can do as much or as little as you like. Contact us to talk about your ideas or to schedule an appointment. 858-566-6969 or maxusa©poweredbymax.net