Forums / あなたのドリ車の写真と車のセットアップ　Post pictures and info on your car. / R32 drift/street bitch

Parts Shop MAX :: Forums :: 会員者の車　Club MAX Rides :: あなたのドリ車の写真と車のセットアップ　Post pictures and info on your car.
R32 drift/street bitch	<< Previous thread \| Next thread >>

Go to page >>
Moderators: Parts Shop Max, Dan at MAX USA

Author

Post

MaxGTST

Tue Jan 11 2011, 07:54pm

Registered Member #915

Joined: Sat Dec 11 2010, 06:42pm

Posts: 3

New here, and here's my drift bitch

Sold that car cause I wanted to build my own..

Was planning to buy a S14 but came across this R32 local to me, pretty much stock except for

-tein coilovers
-aftermarket exhaust
-GTR driver seat
-Volk TE37 in some weak size, 18x8.5 and 18x9.5 with a weak offset
-4 other missmatched rims
-GTR hood

Bought this for cheap .. like dirt cheap, so couldn't let this pass.

here's when I bought it
4x4 mode

1hour later .. coilovers maxed out

Weak size wheels ..

Fitted my Nardi steering

Bought some spares cause I sold the TE37 that were on the car

went for that "vip" look.. bought this on yahoo auction
18x9.5 +23 ( planing on running at least a 25mm spacer ) and 18x10 -1.

installed my fmic and a Seibon Carbon Fiber hood that I got for .. free ahah.

bought a 7 point roll cage and I test fitted it.

And cause black is boring ..

Went down to New Jersey for Formula D

looking like a 4x4 compared to my slammed friends... on my way back I picked up a bodykit.

Received those 2 big brown box a morning

Yay finally after 1 month !

Test fitted the rear, front will need a spacer to clear caliper

Lot a camber + stretch + pull and I'll be alright

So .. got tires mounted on those .. was about to pull the fenders when my fender roller gave up on me .. so impatient like I am ( I really can't wait.. ) I installed the rears with a lil mod to my camber arm, giving me like -1000°, so I was able to fit 18x10 -1 on stock fender with only a roll. The car won't roll like this, I'll fix my fender roller and pull those, but I like the look and what about the drop ahah .. I'm gonna kill that bodykit in no time.

Fixed my fender roller, pulled front and rear fenders, adjusted camber & toe, adjusted coilovers.. this is pretty much the final stance

Front
18x9 -2
215/40

Rear
18x10 -1
225/40

Woot !

Small car show we had... won 2 trophies ahah

did some of this

Bought those
18x9 18x10 +23 Work Eurolines... that I'm now selling

Did more of this

Now I need to buy new coilovers since I destroyed those Tein and they're way too soft. Would also like to have some knuckle to get more angle. So I'm looking at buying a set of PBM coils next summer, but I still need to get more info cause they didn't go very low when we ordered a set for a friend R32, needed shorter spring and shorter strut

I won't be updating much since it's winter and I can't work on the car

[ Edited Tue Jan 11 2011, 07:59pm ]