Parts Shop MAX :: Forums :: MAXに質問 Ask MAX :: 作ってもらいたいパーツ Wish List
Rack / Inner tie rod offset forward spacers to prevent over centering at lock << Previous thread | Next thread >>
Moderators: Parts Shop Max, Dan at MAX USA
Author Post
Dan at MAX USA
Wed Aug 24 2011, 07:25PM

Registered Member #2
Joined: Sun Jan 21 2007, 01:28PM

Posts: 2866
Developed for the 350Z angle kit ... but can be used on s-chassis too.







[ Edited Wed Aug 24 2011, 08:33PM ]
Back to top
TravyPoo
Thu Aug 25 2011, 08:04AM
Registered Member #890
Joined: Fri Nov 05 2010, 10:49PM

Posts: 21
very cool. when will they be available? price?
Back to top
Dan at MAX USA
Thu Aug 25 2011, 08:25AM

Registered Member #2
Joined: Sun Jan 21 2007, 01:28PM

Posts: 2866
I'll post up when I know
Back to top
Hollywood
Sun Aug 28 2011, 09:26PM
Registered Member #708
Joined: Sun Feb 28 2010, 12:22PM

Posts: 653
so this over rides the idea of offset rack bushings yes ??. also can you share the solution you guys found on this from his rack end expliding after the hit with ugh charels? just currious what the actual problem was. thanks dan and these parts look sexy in copper
Back to top
Dan at MAX USA
Tue Aug 30 2011, 01:14PM

Registered Member #2
Joined: Sun Jan 21 2007, 01:28PM

Posts: 2866
offset rack bushings are better because these see a lot of torque.

i think the problem was first running over the 6" tall gator back track curb opposite of original track direction

then dirt dropping

then hitting someone after it was already loose
Back to top
wisdomination
Tue Aug 30 2011, 09:29PM
Registered Member #653
Joined: Wed Dec 09 2009, 10:43PM

Posts: 15
How much millimeters do these things move the inner tie rods?
Debatig on whether I should cut and weld my rack mounting points or get these...
Back to top
Hollywood
Wed Aug 31 2011, 08:38AM
Registered Member #708
Joined: Sun Feb 28 2010, 12:22PM

Posts: 653
ah got ya thanks for the insight man.
Back to top
Dan at MAX USA
Thu Sep 01 2011, 06:08PM

Registered Member #2
Joined: Sun Jan 21 2007, 01:28PM

Posts: 2866
36mm forward
Back to top
Dan at MAX USA
Thu Dec 15 2011, 02:00PM

Registered Member #2
Joined: Sun Jan 21 2007, 01:28PM

Posts: 2866
price has been announced $100/pair shipped for early adopters, arrives the end of January. Reserve yours today by paypaling $ to the USA contact email address
Back to top
Dan at MAX USA
Mon Dec 29 2014, 06:13PM

Registered Member #2
Joined: Sun Jan 21 2007, 01:28PM

Posts: 2866
To check your rack for compatibility with our tie rod off setter , hold up the picture below to the rack as viewed from the side with the inner tie rods removed. S14-15 and late 13 is like the Z33, early S13 is different.


[ Edited Mon Dec 29 2014, 06:18PM ]
Back to top
 

Jump:     Back to top

Syndicate this thread: rss 0.92 Syndicate this thread: rss 2.0 Syndicate this thread: RDF
Powered by e107 Forum System